DISPERBYK-2000
Wetting and dispersing aid in solvent-based automotive coatings include CAB Stabilizes pigments in basecoats. It can improve the blackness of carbon black in automotive coatings.
chemical composition
Structured acrylic copolymer containing pigment-affinic groups Solution
typical materialized data
The data given in this data page are only typical values, is not a product specification.
Amine Value | 4 mg KOH/g |
Density (20 °C) | 1.02 g/ml |
Non-volatile content (20 min., 150 °C) | 40 % |
Solvent | Propylene Glycol Methyl Ether Acetate/Ethylene Glycol Butyl Ether 1/1 |
Flashpoint | 45 °C |
Application
Paint Industry
Product Features and Benefits: DISPERBYK-2000deflocculates pigments by steric stabilization,It also makes pigment particles With the same nature of charge,the resulting repulsionrepulsion effect and steric stabilization prevent the pigment from returning to coarse ,So as to eliminate the problem of floating color in the system containing multiple pigments.
High gloss, and improved color due to the small particle size of the deflocculated pigments powerful. In addition,transparent�Transparency of pigments and hiding power of opaque pigments
It can also be improved. For carbon black with very small particles,DISPERBYK-2000 Can significantly improve the blackness of carbon black. Moreover,Due to the reduction in viscosity,leveling properties
Improved,and can increase the amount of pigment added.
Recommended use
DISPERBYK-2000Specially recommended for automotive coatings,suitable for applications containing CAB base coat and all top coats. Even if added after grinding CAB,This additive can also prevent the pigment from returning to coarse. For best grinding results,does not have to be used during the grinding phase CAB.
Recommended dosage
Auxiliary dosage(purchase form)Pigment based:
Inorganic Pigments | 12-17 % |
Titanium dioxide | 5 % |
Organic Pigments | 20-70 % |
carbon black | 70-140 % |
The above recommended dosage is for reference,The optimal dosage needs to be determined through a series of experiments.
Adding method and processing guidance
For best performance,Auxiliary must be added to the mill first,Then add the pigment.
Pre-mix the resin and solvent components in the millbase,Then slowly add the additives while stirring. Only after the additive has been completely dispersedevenly, Add paint. In low polarity base solutions,add DISPERBYK-2000 may cause a temporary viscosity increase in the system. This isa feature of this product,It has no effect on the final dispersion result . The temporary viscosity increase mentioned above can be achieved by adding a small amount of polar solvent (such as alcohol or glycol solvents) to avoid.