Toluene diisocyanate manufacturer Knowledge BYK DISPERBYK 192 Wetting and Dispersing Additive

BYK DISPERBYK 192 Wetting and Dispersing Additive

BYK DISPERBYK 192 Wetting and Dispersing Additive

DISPERBYK-192


VOC-free and solvent-free wetting and dispersing additive for Liquid masterbatches for waterborne coating systems, printing inks and thermoplastics
Ingredients, and the production of colorants for unsaturated polyester systems or gel coats. Particularly suitable for the production of stable effect pigment dispersions.

chemical composition


Copolymer containing pigment affinity groups. VOC free (< 1500 ppm)


typical materialized data


The data given on this data page are typical values ​​only, not Product technical indicators.

Density (20 °C) 1.05 g/ml

Storage and Transportation


The product may freeze when the temperature is below 20°C . Warm to at least 30°C and stir before use.

Application field


room temperature curing system


Features and benefits:The additive deflocculates the pigment by steric stabilization. Due to the small particle size of the deflocculated pigments, the color intensity can be improved. In addition, due to the reduced viscosity, the amount of pigment added can be increased. The additive prevents floodingin complex pigment/colorant combinations and in very difficult colours.


Recommended use


Specially recommended for colorants used in the production of gel coats ; Also recommended for stabilizing pigments in gel coats.


Recommended dosage


Adjuvant dosage (purchase form) based on:

Titanium dioxide 2-5
Titanium dioxide 2-5 %
Organic Pigments 10-15 %
carbon black

10-20 %

The above recommended dosage is for reference, the best The amount to be added needs to be determined through a series of experiments.


Joining method and processing guidance


Grinding should be in water or in the presence of grinding resin conduct. Pigments can only be added after the additive has been completely dispersed.


Thermoplastics


Recommended use


Auxiliary recommended for the production of fatty acid ester based liquids Color masterbatches for colored thermoplastics (especially PET).


Recommended dosage


Adjuvant dosage (purchase form) based on:

Inorganic Pigments 5-10 %
Titanium dioxide 4-7 %
Organic Pigments 15-30 %
carbon black 30-50 %
Effect Pigments 3-5 %

The above recommended dosage is for reference, the best The amount to be added needs to be determined through a series of experiments.


Joining method and processing guidance


For best performance, additive must be under agitation Slowly add to the carrier system. Pigments can only be added after the additive has been completely dispersed..

ica,sans-serif">3-5 %

The above recommended dosage is for reference, the best The amount to be added needs to be determined through a series of experiments.


Joining method and processing guidance


For best performance, additive must be under agitation Slowly add to the carrier system. Pigments can only be added after the additive has been completely dispersed..

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1654

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search