Hydlub-01 is The hydrophilic lubricating coating product independently developed and produced by Haoyi New Materials is mainly composed of hydrophilic polymers. Based on the dipping-heat curing process, it can form a uniform and firm surface Coating, Hydlub-01 has a high affinity for water. Coating Hydlub-01 on the surface of the substrate can reduce the friction coefficient, and it will produce a loach-like lubricating feel after soaking in water for a few seconds, greatly reducing the friction between the guide wire/catheter and the cavity. Friction, enhance the pushability of the product during use, and reduce the damage and discomfort of the patient's cavity tissue.
Significantly reduces friction on a variety of substrate surfaces
Features:
Hydlub-01 Hot The threshold for curing equipment is low, and a stable oven is enough. The operation is relatively simple, and the process parameters can adjust the window width. The coating is a pre-configured liquid and does not require any additives when used, and the solution can be stored at room temperature for a long time. The product produced has excellent batch consistency.
Curing conditions: bake at 50-70°C for 30min-60min (room temperature curing can also be achieved under certain conditions)
Heat curing coating No special equipment is required, ordinary ovens can meet most requirements
Can be used for UV curing Lubrication of inner cavity of products that cannot be handled by coating
Can be used for UV curing Surface lubrication of irregular products that cannot be handled by coating
relative UV coating Lower cost