Toluene diisocyanate manufacturer Knowledge Japan’s Shin-Etsu Silicone Thermally Conductive Material Thermally Conductive Adhesive Material Additional Reaction Type (Single Component) KE-1867, KE-1891

Japan’s Shin-Etsu Silicone Thermally Conductive Material Thermally Conductive Adhesive Material Additional Reaction Type (Single Component) KE-1867, KE-1891

author: Post: 09/05/2023 50read Comments Off

Thermally conductive adhesive additional reaction type (one-component type)

		KE-1867	KE-1891
Cure Type		Append	append
Appearance		gray	gray
Viscosity	Pa-s	60	Paste
Standard curing time	min	120℃×1 hour
Characteristics after curing
Density (23℃)		2.92	3.06
hardness	TypeA	75	96
stretch length	%	60	10
Tensile Strength	MPa	2.1	4.8
Bond strength Al / Al	MPa	1.0	0.8
Heat conductivity	W/m-k	2.2	4.0
Flame Retardancy: UL94		V-0	V-0

Features

The glue before curing is medium Viscosity ~ paste and other types of viscosity, suitable for bonding of heating parts

Take an example

Substrate parts fixing, etc.

pan>

The glue before curing is medium Viscosity ~ paste and other types of viscosity, suitable for bonding of heating parts

Take an example

Substrate parts fixing, etc.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/1741