Quick leak plugging tool

1. Product Introduction
Quick Leak Stopping Material is a new type of leak stopping material developed by researchers from our company's Waterproof Materials Research Institute after repeated improvements based on digesting and absorbing the advantages of similar products at home and abroad. Advanced production equipment and stable product quality.

II. Main features
1. This product is a hydraulic material that sets and hardens quickly, has high hourly strength and has micro-expansion.
2. Its appearance is gray powder, non-toxic, odorless, non-polluting, non-flammable and resistant to chemical corrosion.

3. Technical indicators
Test items Technical requirements
Condensation time, min Initial setting 1-3
Final setting 2-4
15min 10
1h 20
Maximum tensile strength, Mpa,﹥ 1d 35
3d 40
28d 50
Flexural strength, Mpa,﹥ 3d 4.0
Bonding strength, Mpa,﹥ 7d 1.2
Impermeable pressure, Mpa,﹥ 0.8

IV. Scope of application
1. Can be widely used for plugging leaks in pools, houses, underground and tunnel projects Water, emergency repairs, etc.
2. It can be used to plug leaks with water and pressure, and can also be used to treat cracks and joints in cement pipes and cast iron pipes.

5. Precautions
1. Because this product solidifies quickly, do not mix too much ingredients each time.
2. Before plugging the leak, the areas prone to leaking around the leaking point must be waterproofed first, such as scraping a 2mm thick waterproof sealant or other waterproof layer with a certain strength before plugging, otherwise water may seep out from the surrounding area and increase leakage. point.
3. After the leakage is plugged and the coating hardens, moisturizing and curing should be carried out in time for 1-3 days.
4. Construction under the scorching sun in summer should be strengthened; insulation measures should be taken during negative temperature construction in winter.

6. How to use
1. First, cut the leaking point or leaking seam into a bell mouth, and clean up the debris, mud, sand, etc.
2. Put 1 part of the quick leak plugging agent into the container, add 0.25-0.30 parts of water and mix quickly. When the temperature is lower than 10°C, mix with warm water.
3. Put the mixed leak-proofing clay on your hand. When you feel the clay becomes hot and begins to harden, quickly press it in the direction of the leakage, hold it for a certain period of time (about 3-5 minutes), and then let go, and the sealing can be done. Apply waterproof sealant or E-type polymer waterproof mortar to the blocked area and surrounding areas.

7. Packaging and storage:
This product should be moisture-proof and sun-proof. The carton is 25kg/bag and the bag is 20kg/bag. The shelf life is one year.

</p