thickener

1. Product introduction

This product is white fibrous or granular powder, which can be dissolved in absolute ethanol, ether, It is almost insoluble in acetone and dissolves in cold water into a clear or slightly turbid colloidal solution. This product is soluble in certain organic solvents and can also be dissolved in mixed solvents of water and organic solvents. This product is an admixture that can increase the viscosity of concrete mixtures and also prevents bleeding.

2. Product performance

Water retention: This product is a highly efficient water retention agent. It has a wide range of applications in building materials and many other aspects.

Adhesion: As a high-performance adhesive, this product is used in building materials and many other aspects.

3. Scope of application:

This product is suitable for waterproof repair mortar and mortar elastic adhesive , exterior wall exterior insulation bonding mortar, economical exterior wall exterior insulation bonding mortar, exterior wall exterior insulation plastering mortar, economical exterior wall exterior insulation plastering mortar, self-leveling mortar, concrete mortar, ceramic wall and floor tile agent, ceramic wall and floor tiles Grouting agent, large mold built-in exterior wall exterior insulation system plastering mortar, rubber powder polystyrene particle exterior wall exterior insulation system, aerated concrete plastering mortar, exterior wall water-resistant putty, exterior wall flexible putty, exterior wall interior insulation plaster Gypsum, bonding gypsum, painting gypsum, leveling gypsum, gypsum block sticky powder, etc.

4. Reference dosage

The commonly used dosage of this product is 0.6-1.05%.

5. How to use:

If the thickening agent is added directly to the water, it will cause agglomeration. Then it dissolves, but this dissolution is slow and difficult. The following three usage methods are recommended. Users can choose the most convenient method according to usage conditions:

1. Hot water method: add the required amount 1/ 3 or 2/3 of the water, and heat it to above 80 ℃. Since the thickener does not dissolve in hot water, the initial thickener can be evenly dispersed in the hot water; then add the remaining amount of cold water or ice water to Slurry in hot water, stir and then cool the mixture.

2. Powder mixing method: fully disperse the thickener powder particles with an equal or greater amount of other powdery ingredients by dry mixing, and then add water Dissolved, the thickener can be dissolved at this time without agglomeration.

3. Organic solvent wetting method: Pre-disperse or moisten the thickener with an organic solvent, such as ethanol, ethylene glycol or oil, and then add water to dissolve it. The thickener can also be dissolved smoothly.
Note: The surface-treated thickener can be wetted with cold water first, then add ammonia or alkaline water to adjust the pH to 8-10 to form a viscosity.

6. Packaging and storage:

This product is packed in plastic bags lined with film, 25kg/ bag. When storing, it should be placed in a ventilated and dry place indoors, and be protected from rain and moisture.

</p