Special adhesive for inorganic insulation boards

1. Product description:

Special adhesive for inorganic insulation boards is a bonding material specially developed based on the characteristics of inorganic insulation boards. It is the most commonly used bonding material in construction and decoration projects. , it has strong adhesion, wide adaptability and anti-sag.

2. Product characteristics:

1. Excellent adhesion, excellent bonding performance with base layers of various materials.

2. Good flexibility, thermal and fireproof, water-resistant, freeze-thaw resistant.

3. Good durability, easy to operate, and good water resistance.

4. This product is non-toxic, harmless and green.

3. Base surface treatment:

1. Before pasting the inorganic insulation board, it is necessary to ensure that the strength of the stucco layer has been reached.

2. The surface of the base material should be solid, smooth, without cracks, release agents and media that cause isolation. Excessively uneven surfaces should be smoothed with concrete interface treatment before construction.

3. If the base surface is too dry, it should be properly moistened with water before construction.

IV. Construction method:

1. Add clean water according to the water-cement ratio of 1:4 and stir with a stirrer. There should be no dough and it will become a paste without sedimentation.

2. Apply the mixed slurry on the back of the board using the strip-gluing method or the dot-frame method, and then paste it on the base wall.

3. The arrangement method of inorganic insulation boards should be staggered according to the regulations.

5. Unit dosage:

The dosage per square meter is 4-6Kg, which varies according to the different pasting methods.

VI. Notes:

1. The mixed slurry must be used up within 4 hours, and the dried slurry cannot be reused.

2. It is strictly prohibited to add sand and other other materials into the product.

3. The surface layer can only be constructed after at least 24 hours after the inorganic insulation board is installed on the wall.

4. The construction temperature is between 5℃-35℃.

7. Packaging and storage:

This product should be stored in a dry and cool place, moisture-proof and sun-proof. Each bag is 25kg and the shelf life is three months. </p