Wall renovation putty

1. Product introduction:
This product is a high-grade exterior wall putty specially developed for exterior wall renovation projects. It is green, environmentally friendly and non-toxic. It provides a flat base surface with good affinity and good adhesion for surface coatings. Strong, has extremely strong adhesion to walls and coatings. It has good crack resistance, effectively inhibits the expansion of micro-cracks in the underlying layer, and ensures project quality. Good water resistance and breathability ensure that the wall and paint surface are dry.

2. Scope of application:
                                                                               Â      with with paint primer on new wall base surface; renovated paint primer on old facing (paint, ceramic tile, mosaic, and stone); high-end metal paint primer Ash.

3. Construction technology:
1. During construction, the base surface must be solid, flat, free of dirt and other loose objects;
2. If the wall is too dry before construction, it should be cleaned in advance Wet the base surface, and then start scraping construction;
3. Mixing ratio: Powder: water: additive = 25 kg of powder: 6~8 kg of water: 2.0 liter of additive, depending on the basic situation.
4. Pour the water first, then add the powder and additives, and stir evenly. Let it stand for 10 minutes to mature, then stir and scrape. The second scraping must be done after the first drying. , control the thickness between 1.5~2mm. ;
5. Carry out topcoat construction after about 5 to 7 days.

IV. Notes:
1. The mixed putty should be used up within 4 hours;
2. After the putty slurry solidifies, do not add water and stir before use;
3. This product is suitable for use in an environment of 5℃~40℃. Do not construct it under rain.

5. Reference dosage:
It is about 1.5~2.5kg/m2 according to different base surfaces.

6. Packaging:
This product is 25kg/bag. </p