Colored floor mortar

1. Product features:

1. It has excellent fluidity, automatically levels the ground, is non-slip, wear-resistant, ready to use after mixing with water, and is simple and quick to construct.

2. Improve the density and hardness of the base layer, improve the homogeneity and provide sound insulation.

3. Rapid setting and early strength. It can be put into use after 1-2 days. It has low shrinkage and prevents cracking.

4. It is also suitable for heating floors with temperatures up to 50℃.

2. Scope of application:

This product is suitable for laying colored floors, warehouses, elastic floors, carpets, commercial and civil buildings with wooden floor underlayment, etc.

3. Construction methods:

Base layer treatment: The base layer of inorganic non-metallic materials should be hard, flat, dry and clean. No cracks, no grease and no release agents.

1. If the surface of the base layer is loose or has a large area of ​​floating slurry, shot blasting is required;

2. If the base layer is uneven in a large area, it must be polished with a ground grinder;

3. Clean thoroughly with a vacuum cleaner before priming.

4. Dosage:

About 1.6-1.8kg/m2 per square meter (the pouring thickness depends on the design). Generally, the thickness of the grout is about 3mm (i.e. 5.0-5.4kg /m2) The actual amount depends on the flatness of the ground.

V. Notes:

1. The conditions of the base to be constructed will directly affect the amount of self-leveling construction, and must be carefully tested in advance and properly handled.

2. During construction, there should be no excessive ventilation indoors.

3. There are certain differences in the construction methods of heating floors.

6. Packaging and storage:

This product should be moisture-proof and sun-proof. Each bag is 25kg and the shelf life is six months. </p