Concrete floor wear-resistant agent is used to improve the wear resistance of new and old concrete pavements and parking lots. It can also be used to repair sandy and dusty roads. This product is an inorganic silicate surface treatment agent. When it is sprayed on the capillary pores and micro-cracks on the surface, it then reacts with calcium hydroxide to harden, improve the pore structure of the concrete surface, and make the original capillary pores smaller. , improve the bonding force between cement and aggregate, thereby improving the wear resistance of concrete.
The wear-resistant agent is diluted with water in a ratio of 1:3. Dilute the wear-resistant agent to 0.3-0.6kg/m2 and spray until it is completely wet. The spraying construction temperature should be above 0℃. The spraying tool can be a general low-pressure sprayer. Spray 2-3 times. The spraying interval is 0.5 hours in summer and 2 hours in winter. The number of spraying should be more than 3 times during wear-resistant repair. </p
微信扫一扫打赏
