1. Product introduction
The lime crystal (plasticizer) produced by our factory is a new type of mortar developed and compounded by professional technicians using a variety of chemical materials to combine the advantages of various mortar admixtures. Plasticized building materials, the introduction of this product can significantly save project costs, and is at the leading level in the domestic construction market.
2. Product performance:
Lime crystal (plasticizer) is a new type of building admixture that completely replaces white ash in mortar. This product has excellent dispersibility. It can fully improve the utilization rate and strength of cement, and can significantly improve the workability, fluidity, cohesion, water retention and adhesion of mortar, making the mortar air-enabled and plastic, soft and viscous, with a high ash sticking rate and reduced dust on the ground. , the ash mouth is full, so that the compacted surface of the bricks reaches more than 97%. The mortar does not separate, bleed, or settle. It has the characteristics of air entrainment, water reduction, early strength, antifreeze, sound insulation, heat preservation, impermeability, stability, It has enhanced functions, and the plaster on the interior and exterior walls will not fall off, crack, hollow, peel or explode.
3. Scope of application:
This product is widely used in red bricks, hollow bricks, air-entrained blocks, air-entrained concrete, and various energy-saving thermal insulation and defense products in industrial, civil, and national defense construction projects. Masonry and plastering of seepage and other structures, ceilings, floor tiles, etc.
IV. Product advantages:
Lime crystals (plasticizer) can completely replace white ash when used in mortar, saving 20-30% of water and 10-40% of cement (in It saves 10-20% in mixed mortar and 30-40% in cement mortar). At the same time, it saves space, transportation, loading and unloading, water, electricity, and labor, reduces labor intensity, improves project quality, does not pollute the environment, and greatly saves project costs.
5. How to use:
Use a measuring cup to pour the lime crystals (plasticizer) into the sand and water ash of the mixer in proportion, stir for 3 minutes and then use. Control the amount of water and place the mixed mortar in a water-retaining place to avoid affecting the workability of the mortar. When plastering an interior wall, smooth the wall and then lightly move it with a trowel to increase the density of the wall. Wait for the wall to gain strength before scraping the putty powder for better results.
6. Recommended ratio table of masonry plastering mortar
Label | M10 | M7.5 | M5 | M2.5 | M13 |
Cement 32.5 | 50 | 50 | 50 | 50 | 50 |
Fine and medium sand | 250 | 350 | 400 | 600 | 250 |
Lime King | 0.075 | 0.1 | 0.125 | 0.15 | 0.2 |
Dosage | 0.15% | 0.2% | 0.25% | 0.3% | Specialized exterior wall plastering cement mortar (specially made) |
proportion | 1:5:0.0015 | 1:7:0.002 | 1:8:0.0025 | 1:12:0.003 |
7. Packaging and storage
This product is packed in a woven laminated bag , net weight per bag is 25kg. Carton packaging is 20kg. This product should be stored in a dry and ventilated place to prevent moisture caking and oil stains. The shelf life is three years.
er" width="92">0.2%
0.25%
0.3%
Specialized exterior wall plastering cement mortar (specially made)
Proportion
1:5:0.0015
1:7:0.002
1:8:0.0025
1:12:0.003
7. Packaging and storage
This product is packed in woven laminated bags. The net weight of the bag is 25kg. Carton packaging is 20kg. This product should be stored in a dry and ventilated place to prevent moisture caking and oil stains. The shelf life is three years.
</p