Toluene diisocyanate manufacturer Knowledge JH-SHD high-efficiency water reducing agent

JH-SHD high-efficiency water reducing agent

JH-SHD high-efficiency water reducing agent

1. Product introduction
This product is white powder or colorless (or light yellow) viscous transparent liquid. The main component is sulfonated melamine formaldehyde resin. It is low-alkali and chlorine-free, non-toxic, non-polluting, and steel-free. Rust hazards.
2. Product Features
It has a large water reduction rate, which can greatly improve the fluidity of concrete and mortar, and significantly improve the early strength and later strength. Good adaptability to various cements.
3. Scope of application
This product is suitable for making high-strength concrete, refractory materials, pumped concrete, fluid concrete, colored concrete, steam-cured concrete, and high-strength mortar; preparing grouting materials for the foundation of pouring equipment; preparing Self-leveling floor materials, wear-resistant floors; formulated with high-strength gypsum, the fluidity, compressive strength, flexural strength, impermeability, surface finish and elasticity of gypsum products are improved, increasing the turnover rate of gypsum molds by 4-5 times .
IV. Main technical performance
1. JH-SHD high-efficiency water-reducing agent, the dosage is 0.3-1.5% of the cement quality, the water reduction rate is 15-25%, and the 1d strength of concrete is increased by 40-100 %, the 7d strength is increased by 30-70%, and the 28d strength is increased by 30-60%. The tensile strength, flexural strength and post-strength are also improved, and the bonding strength of steel bars, carbonation resistance, permeability and frost resistance are improved.
2. The adaptability of steam curing is good, the strength of steam curing out of the pond can be increased by 20-30%, and the steam curing time can be shortened by 1-2 hours to achieve the same strength out of the pond. Each ton of product can save 30 tons of coal.
3. It is suitable for making refractory concrete from aluminate cement. The compressive strength can be increased by 60-170% under drying at 110℃ and high temperature (1000℃-2000℃). At the same time, the fluidity of concrete is significantly improved.
4. The slump of concrete can be increased from 50mm to 150-250mm. If the dosage is exceeded by 1-2 times, the later strength will not be reduced. 5. It can save 15-20% of cement. When mixed with fly ash, it can save 20-30% of cement. Each ton of product can save more than 20 tons of cement.
V. Packaging and Storage
The powder of this product is packed in woven bags, 25 kg/bag, and the liquid is packed in barrels of 200 kg. This product is non-toxic, non-corrosive, non-flammable, should be protected from moisture and light, and has a storage period of two years. </p

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/18607

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search