Toluene diisocyanate manufacturer Knowledge Can lubricants be used universally?

Can lubricants be used universally?

Can lubricants be used universally?

Lubricant is a new product that lubricates vehicle pumps and ground pump pipes. Using lubricant can save costs and reduce more tedious work, saving time, effort, worry and trouble. It can completely replace pump mortar and is a brand-new pumping construction material.

Lubricating agent is a kind of construction consumable that lubricates concrete pumping pipes. The emergence of lubricating agent solves the problems of high pipe lubrication cost and low pipe lubrication efficiency of concrete pumping equipment. Pipe moistening agents are produced from a variety of high molecular polymers. Through technological innovation, the pipe moistening agents produced by professional manufacturers are non-corrosive to steel and have no impact on the strength of concrete. They are new, efficient, energy-saving and environmentally friendly products.

How to distinguish qualified moisturizer?

1. When purchasing concrete pipe moistening agents, please choose pipe moistening agents produced by large-scale qualified manufacturers. Qualified manufacturers are registered with the national industrial and commercial department and are subject to the supervision of the national industrial and commercial authorities.

2. Pay attention to the product packaging bag. Regular manufacturers will print the manufacturer's address, production date, usage method and usage ratio on the packaging bag.

3. When buying moisturizer, please don’t be greedy for cheap. There is an old saying that cheap goods are not good. Under the temptation of profits, some unscrupulous merchants use inferior raw materials to produce moisturizer. The agent cannot achieve the effect of lubricating the pipeline, causing pipe blockage and increasing construction costs and construction time.

Can the lubricating agent be used universally?

The lubricating agent produced by regular manufacturers is a general-purpose product (applicable to: floor pumps, vehicle pumps, etc.), but the usage and dosage are slightly different. There are different. For lubricating agent pumps produced by regular manufacturers, one bag is enough if the distance is within 50 meters, and 2 bags if the distance is longer than 50 meters. The amount of lubricating agent used for ground pumps is twice that of car pumps. There is no need to increase the amount of water used for preparation. The twice the amount is mainly to increase the concentration of lubricating solution so that the lubricating solution can adhere well to the inner wall of the pipe to provide lubrication. Reduce the resistance of concrete during pumping. Before the ground pump prepares the lubrication solution, it must first pump clean water to rinse the debris in the pipe to reduce the pumping resistance to the concrete. After rinsing the pipe, the remaining clear water in the pipe must be drained to avoid diluting the lubrication solution. The best moisturizing effect cannot be achieved. The lubrication solution after lubrication must be discharged outside the template and shall not be poured into the building structure. The lubrication solution will naturally evaporate after 72 hours, leaving no residue.                                                                                        

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/18670

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search