Pump Runtong is a new product that lubricates vehicle pumps and ground pump pipelines. Using Pump Runtong can save costs and reduce more tedious work, saving time, effort, worry and trouble. It can completely replace pump mortar and is a brand-new pumping construction material.
Pump Runtong is a construction consumable that lubricates concrete pumping pipes. The emergence of Pump Runtong solves the problems of high pipe lubrication costs and low pipe lubrication efficiency for concrete pumping equipment. Pump Runtong is produced from a variety of polymers. After technological innovation, Pump Runtong produced by professional manufacturers has no corrosion to steel and has no impact on the strength of concrete. It is a new, efficient, energy-saving and environmentally friendly product.
How to distinguish qualified pumps?
1. When purchasing concrete pumps, please choose pumps produced by large and qualified manufacturers. Qualified manufacturers are registered with the national industrial and commercial department and are supervised by the national industrial and commercial authorities.
2. Pay attention to the product packaging bag. Regular manufacturers will print the manufacturer's address, production date, usage method and usage ratio on the packaging bag.
3. When buying Pump Runtong, please do not be greedy for cheap. There is an old saying that cheap goods are not good. Under the temptation of profits, some unscrupulous merchants use inferior raw materials to produce Pump Runtong. The effect of lubricating the pipeline cannot be achieved, causing pipe blockage and increasing construction costs and construction time.
Can Pump Runtong be used universally?
The Pump Runtong produced by regular manufacturers is a general-purpose product (applicable to: floor pumps, vehicle pumps, etc.), but the usage and dosage are slightly different. There are different. For pumps produced by regular manufacturers, one bag is enough for the pump within 50 meters, and 2 bags for the pump over 50 meters. The amount of ground pump lubrication is twice that of the vehicle pump. There is no need to increase the amount of water used for preparation. The twice the amount is mainly to increase the concentration of the lubrication solution, so that the lubrication solution can adhere well to the inner wall of the pipe to provide lubrication. Reduce the resistance of concrete during pumping. Before the ground pump prepares the lubrication solution, it must first pump clean water to rinse the debris in the pipe to reduce the pumping resistance to the concrete. After rinsing the pipe, the remaining clear water in the pipe must be drained to avoid diluting the lubrication solution. The best moisturizing effect cannot be achieved. The lubrication solution after lubrication must be discharged outside the template and shall not be poured into the building structure. The lubrication solution will naturally evaporate after 72 hours, leaving no residue. </p
微信扫一扫打赏
