Covestro Dispercoll S 3030 Nano SiO2 dispersion waterborne neoprene additive high thickening rubber bonding

                                 

Type
Aqueous anionic amorphous silica colloidal solution

Purpose
  Dispercoll® S 3030 is an additive based on Dispercoll® C series water-based neoprene adhesives. Appropriate viscosity characteristics for some special applications can be achieved by adding ZnO (such as Borchers 9804) to the formulation. The addition of Dabaike S3030 can improve the moisture resistance and heat resistance of water-based neoprene.

Specifications

Features	Value	Measurement unit	Method
Concentration	30-31	%	Internal method PV 054

Other data*

Features	Value	Measurement unit	Method
PH	about 10		DIN ISO 976
Density	about1.21	g/ cm3	DIN 5 1 757
Particle size	about9	nm
specific surface area	about300	m2/g	Internal method PV055

*This data is general information and is not part of the product manual.

Packaging
        Packed in 140kg polyethylene plastic drums, and can also be customized according to requirements.

Save
- Store in original Covestro airtight container.
- Recommended storage temperature: 10-25°C.
- Protect from cold, heat and foreign substances.
General Information: This product is very sensitive to frost and should not be stored below 5°C. Frozen products will be damaged and cannot be recovered.
Containers must be kept airtight, otherwise evaporation or contamination will result in product damage.

The product will be damaged and cannot be restored.
Containers must be kept airtight, otherwise evaporation or contamination will result in product damage.