Lubrication agent is a new energy-saving and environmentally friendly material born in recent years. Many companies are using it, and the results are very good. The lubricant effect is better than that of traditional cement sand paddle lubricants. However, some construction companies have not yet used energy-saving and environmentally friendly products such as pipe lubricants. They are worried about "fear of poor use", "fear of affecting the quality of construction", etc. These problems have been plaguing everyone. Today, the author will share with you We will give you detailed analysis and answers to your concerns. It is mainly analyzed from the following two aspects.
First: First of all, you must buy a qualified lubricant
There are many large and small lubricant manufacturers on the market. Their quality varies, and the results directly affect the lubricant. Effect. When everyone is preparing to use pipe moisturizer, I believe they all have a common "wishes", which is to moisturize the pipe well, not block the pipe, pump concrete smoothly, and secondly, to reduce costs. Most of the channels for purchasing lubricants are through the Internet. The prices of various manufacturers will vary due to different lubrication effects! There is a principle that everyone should follow, "No good product is cheap". Although the principle of "you get what you pay for" is simple, there are still many friends who are greedy for cheap and buy inferior moisturizing agents, and the results are very poor. The price of good lubricants on the market now is generally around 6 to 8 yuan, and the lubrication effect can completely replace sand paddles.
Second: Correct use method
Correct use method will make the effect of moisturizer twice the result with half the effort! Many friends did not read the instructions carefully after buying the lubricant, and started construction based on their simple understanding. The author once encountered a coworker who poured the lubricating agent into the water before starting to moisturize the pipes without allowing the lubricating agent to fully dissolve. As a result, the pipes were blocked due to poor lubricating. The correct way to use it is to prepare the lubricant in strict accordance with the usage ratio given by the manufacturer. Pour the lubricating agent into the water. First turn on the reverse pump and stir for about 10 times. Pause for 3 to 5 minutes to allow the lubricating agent to fully dissolve. Then turn on the reverse pump and stir for about 10 times. At this time, the lubricating solution will become very viscous. After all preparations, Once the work is ready, the pipes can be moistened and pumped concrete.
As long as everyone grasps the above two principles, no matter it is a vehicle pump or a floor pump, there is no problem at all in using lubricant to moisten the pipes. It can definitely save energy, reduce emissions, and save time, effort, and energy. money! </p
微信扫一扫打赏
