Evonik Original Air Chemicals Dabco T-9 Stannous Octanoate Organotin Catalyst T9

                                                                                                                                                                                                              |

Product Introduction
Dabco T-9 catalyst (stannous octoate) is suitable for the manufacture of “one-step” polyetherurethane foam. Because of its uniform activity and excellent stability, this catalyst is more suitable for economical, high-speed and large-scale foam production than other common tin acetate products.

Typical Physical Properties

Application
Dabco T-9 catalyst is suitable for the manufacture of soft, semi-soft and rigid polyether foam . It is also used as a catalyst in the manufacture of urethane coatings and sealants.

Safety and handling instructions
Dabco T-9 may irritate the eyes, therefore, it is advisable to avoid direct or prolonged contact with it through clothing This tin product. When heated, these catalysts produce vapors of organic sulfides and their pyrolyzed compounds. Inhalation of this vapor can cause irritation and cause discomfort. If the eyes are contacted, immediately rinse the eyes with water for at least 15 minutes, and seek medical treatment. If other parts of the body become infected, they must be washed thoroughly with soap and water and rinsed several times. Contaminated clothing should also be washed with soap and water before reuse. In case of contact with vapors, the infected person should be removed to an uncontaminated area.

For more information on safety , Please refer to Dabco T-9 Catalyst Material Safety Data Sheet, which can be obtained from our company.