Covestro Dispercoll C74 Waterborne neoprene contact adhesive Long open time Good heat resistance

Basic product performance

Other parameters*                              

*The above data only give general information, not the characteristic properties of this product.

Application
Dispercoll® (Dispercoll®) C 74 is used in water-based adhesive formulations and is used in industrial fields such as shoemaking, construction, furniture, mattresses, and automobiles.

Packaging
120kg plastic drum, 1000L container, tank truck.

Save
Stored in the original airtight container at 23°C, the shelf life of Dibak® C 74 is 6 months. Storage temperatures above 30°C should be avoided. The storage temperature should not be lower than 5°C, otherwise the product will freeze and solidify. Freezing Derby® C 74 will be completely ineffective. The packaging container must be tightly closed and protected from direct sunlight, otherwise the evaporation of water will cause it to form a non-redispersible polymer film.

Waste Disposal
  Unused Residue® product residues should be incinerated according to local regulations. Polymer dispersions should be disposed of under special supervision and should not pollute soil or surface water.

Safety: Hazardous Nature
According to the relevant EC regulations and corresponding regulations of special EU member states. This product is not classified as dangerous goods. According to transport regulations, it is not classified as dangerous goods.
For countries outside the European Union, the regulations on classification, packaging, labeling and transportation of hazardous substances in their respective countries must be complied with.
Please refer to the safety data sheet for handling, product safety and ecological data.
  Avoid direct skin and eye contact with the product, it is recommended to wear goggles and protective gloves.
When spraying glue, adequate ventilation should be maintained or respiratory protection measures should be provided. Comply with any international regulations regarding the spray application of dispersion glues. For special applications, multi-component (usually two-component) systems are used, depending on the chemical composition of the system, further safety measures are to be developed.