Covestro Dispercoll C VP LS 2372H Waterborne neoprene contact adhesive

Type Low crystallinity water-based polychloroprene colloidal dispersion

Delivery form Waterborne poly-2-chloro-1,3-butadiene dispersion

Basic product performance*

*The above data are temporary values, and the product specifications to be followed are subject to the final released information

Apply
Dispercoll® (Dispercoll®) C VP LS 2372H is used in water-based adhesive formulations and is used in industrial fields such as shoemaking, construction, furniture, mattresses, and automobiles. Long pot life and good adhesion to low surface energy materials are the properties of Dalbek® C VP LS 2372H.

Packaging
    125 and 1000L containers, tank trucks.

Save
  Stored in the original airtight container at 23°C, the shelf life of Dibak® C VP LS 2372H is 6 months. Storage temperatures above 30°C should be avoided. The storage temperature should not be lower than 5°C, otherwise the product will freeze and solidify. Freezing Derby® C VP LS 2372H will fail completely. The packaging container must be tightly closed and protected from direct sunlight, otherwise the evaporation of water will cause it to form a non-redispersible polymer film.

Waste Disposal        
Unused Residue product residues should be incinerated according to local regulations. The European Waste Catalog (EWC) code must be used. In regions other than applicable German packaging regulations, the packaging can be disposed of in local or industrial incinerators after complete emptying. Hazard warnings on containers may only be removed after cleaning.

Safety: Hazardous nature
According to the relevant EC regulations and corresponding regulations of special EU member states. This product is not classified as dangerous goods. According to transport regulations, it is not classified as dangerous goods.
For countries outside the European Union, the regulations on classification, packaging, labeling and transportation of hazardous substances in their respective countries must be complied with.
Handling, product safety and ecological data can be found in the Safety Data Sheet.
  Avoid direct skin and eye contact with the product, it is recommended to wear goggles and protective gloves.
When spraying glue, adequate ventilation should be maintained or respiratory protection measures should be provided. Comply with any international regulations regarding the spray application of dispersion glues. For special applications, multi-component (usually two-component) systems are used. Depending on the chemical composition of the system, further safety measures are yet to be developed.

Disclaimer
This product is experimental and has not yet gained extensive experience. Accordingly, the manufacturer disclaims any warranty regarding the performance of the product in operation and use.