Covestro Acclaim® Polyol 4200 linear polypropylene ether polyol

                               

Product Introduction
Acclaim ® 4200 is a polyether polyol. Suitable for use in combination with Desmodur® in solvent-free or low-solvent polyurethane formulations.

Supply Form
Solvent-free, light white low viscosity liquid

Specifications

Features	Value	Measurement unit	Method
hydroxyl value	28.0±1.5	mgKOH/g	PET-11-01
acid value	0.004-0.020	mgKOH/g	PET-01-01
Moisture	≤0.030	%(by weight)	PET-19-01
Color value(APHA)	≤50		PET-06-01
Unsaturation	≤0.007	mAeq/g	PET-18-01

Other data*

Features	Value	Measurement unit	Method
density,25℃	about1.0	g/cm3	DIN51757
OHEquivalent Weight	about2000	g
Viscosity,25°C	about980	mPa·s	PET-10-01
Hydroxyl content	0.85±0.05	%(by weight)

*This data is general information , are not part of the product specification.

density,25℃

about1.0

g/cm3

DIN51757

OHEquivalent Weight

about2000

g

Viscosity,25°C

about980

mPa·s

PET-10-01

Hydroxyl content

0.85±0.05

%(by weight)

*This data is general information , are not part of the product specification.

Features/Applications
Polyol Acclaim® 4200 is suitable for use with various Desmodur® products Used in solvent-free elastic coatings, adhesives and sealants formulations. Polyol Acclaim® 4200 can be diluted with esters, ketones and aromatic hydrocarbon solvents. And must use urethane grade solvent (moisture <0.05% by weight)

Save
- Store in original airtight container.
- Recommended storage temperature: 15-25°C.
- Avoid moisture, heat and foreign substances.
Normal INFORMATION:This product is very sensitive to this moisture and must therefore be stored in its original airtight container.

Storage Time
The product is stored in full compliance with the requirements of the "Storage" clause above and When properly processed, the product complies with the specifications or characteristic values ​​stated in the clause "Specifications or characteristic values" above (as applicable) within 12 months from the date of shipment stated on the transport document. If the product exceeds the above-mentioned 12-month period, it does not mean that it no longer meets the set values ​​in the specifications or characteristic values. However, it is recommended that products older than 12 months from the date of shipment be tested before use to confirm that they still comply with the values ​​set forth in the specification or characteristic values. The manufacturer does not make any promises for products more than 12 months from the date of shipment, and accepts no responsibility or liability for non-conformity to specifications or set values ​​in characteristic values.

-family:Arial,Helvetica,sans-serif"> Features/Applications
Polyol Acclaim® 4200 is suitable for use with various Desmodur® products Used in solvent-free elastic coatings, adhesives and sealants formulations. Polyol Acclaim® 4200 can be diluted with esters, ketones and aromatic hydrocarbon solvents. And must use urethane grade solvent (moisture <0.05% by weight)

Save
- Store in original airtight container.
- Recommended storage temperature: 15-25°C.
- Avoid moisture, heat and foreign substances.
Normal INFORMATION:This product is very sensitive to this moisture and must therefore be stored in its original airtight container.

Storage Time
The product is stored in full compliance with the requirements of the "Storage" clause above and When properly processed, the product complies with the specifications or characteristic values ​​stated in the clause "Specifications or characteristic values" above (as applicable) within 12 months from the date of shipment stated on the transport document. If the product exceeds the above-mentioned 12-month period, it does not mean that it no longer meets the set values ​​in the specifications or characteristic values. However, it is recommended that products older than 12 months from the date of shipment be tested before use to confirm that they still comply with the values ​​set forth in the specification or characteristic values. The manufacturer does not make any promises for products more than 12 months from the date of shipment, and accepts no responsibility or liability for non-conformity to specifications or set values ​​in characteristic values.