|
Non-volatile component content
(1g/1mltoluene /1h/125℃)
|
Compatibility
Suitable co-reactants for the preparation of waterborne two-component polyurethane coatings are aliphatic polyisocyanates, such as Desmodur® N3600, N3400, N3900, XP2410, Bayhydur® 3100, 401-70, 305, 304, VP LS 2150BA, VP LS 2306, XP 2655 or XP 2487/1.
Solubility/Dilution
Bayhydrol® A 2601 can be diluted with water in any proportion
Save
– Store in original Covestro airtight container.
– Recommended storage temperature: >0-30℃
– Keep away from freezing, heat and foreign substances.
General Information:Short cooling to -18°C will usually not damage the product, but prolonged freezing will seriously damage the product. Long-term storage at higher temperatures will result in a decrease in viscosity and/or an increase in average particle size, possibly leading to precipitation or coagulation. The viscosity of this product mainly depends on the pH value. The pH may decrease during storage, resulting in a decrease in viscosity. The viscosity can be restored to its original value by adding a small amount of 10% aqueous solution of dimethylethanolamine. The product will be unusable due to some bacterial mold or algae contamination.
Storage time
Covestro declares that the product is stored in full compliance with the requirements of the above “storage” clause and When properly handled, the product complies with the above “Specifications” within 6 months from the date of shipment stated on the shipping document Specifications or characteristic values stated in the clause “or characteristic values”, as applicable. If the product exceeds the above-mentioned 6-month period, it does not mean that it no longer meets the set values in the specifications or characteristic values. However, Covestro recommendsfor products that are more than 6 months old from the shipping date before testing to confirm that it still meets the values set forth in the specification or characteristic values. Covestro makes no commitments for products that are more than 6 months old, Nor does it assume any responsibility or liability for non-compliance with specifications or for setting values in characteristic values.
Security
This product data sheet applies only to the latest version of the corresponding safety document. Any updates to safety-related information consistent with legal requirements will only be reflected in the Safety Data Sheet, which will be updated and published. Information on current classification and labelling, application and process methods, and further safety data can be found on the latest valid safety data sheet.
|
微信扫一扫打赏
