1. Water-cement ratio: The larger the water-cement ratio, the more bleeding will occur. If the water consumption increases by 20%, the amount of bleeding may increase by 2 to 3 times.
2. Cement: The type, fineness and dosage of cement will affect bleeding. The finer the cement, the less the amount of bleeding; the greater the amount of cement, the less the amount of bleeding. Therefore, increasing the amount of cement and reducing the water-cement ratio can reduce bleeding.
3. Mineral additives: Mineral additives such as fly ash, slag, silica powder and natural volcanic ash can reduce bleeding, especially silica powder, which has a very obvious effect on reducing bleeding. Therefore, early maintenance of silica fume concrete must be strengthened to prevent plastic shrinkage and cracking.
4. Aggregate: The higher the mud content of the aggregate, the less bleeding will occur. However, high mud content will have a negative impact on other properties of concrete, such as increasing water demand, increasing shrinkage, etc.
5. Chemical admixtures: Air-entraining agents can reduce bleeding. Water reducers will also reduce bleeding.
</p
微信扫一扫打赏
