Toluene diisocyanate manufacturer Knowledge What are the requirements for the mud content and mud lump content of sand in construction mortar?

What are the requirements for the mud content and mud lump content of sand in construction mortar?

What are the requirements for the mud content and mud lump content of sand in construction mortar?

Mud content refers to the content of particles with a nominal particle size less than 80um in the aggregate.
The mud content of sand refers to the content of particles in the sand that have a nominal particle size greater than 1.25mm and become less than 630um after washing and hand-squeezing.
The mud particles in sand are generally fine. The mud particles increase the specific surface area of ​​the aggregate, which will increase the amount of water or cement slurry. Clay minerals usually have strong water absorption. They expand when absorbing water and shrink when drying, which will adversely affect the strength, dry shrinkage and other durability properties of the mortar. When mud particles are wrapped on the surface of sand, it will also affect the bonding ability between cement slurry and sand. When mud blocks exist, due to the low strength of the mud blocks themselves, they not only fail to function as a skeleton, but also form weak parts in the mortar, reducing the mechanical properties of the mortar. Therefore, the mud content and mud block content of the sand in the mortar should be limited, requiring the mud content to be ≦5.0% and the mud block content to be ≦2.0%. </p

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/23687

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search