Toluene diisocyanate manufacturer Knowledge (±)-Camphor (±)-Camphor

(±)-Camphor (±)-Camphor

(±)-camphor structural formula

Structural formula

Business number 01KV
Molecular formula C10H16O
Molecular weight 152.24
label

2-camphenone,

DL-camphor,

DL-Camphor,

DL-2-Bornanone,

moth repellent,

preservative,

Functional Materials,

Plasticizer

Numbering system

CAS number:76-22-2

MDL number:MFCD00074738

EINECS number:200-945-0

RTECS number:EX1260000

BRN number:2042745

PubChem number:24852306

Physical property data

1. Characteristics: Colorless to white translucent lumps or powder with camphor wood smell. [1]

2. Melting point (℃): 174~180[2]

3. Boiling point (℃) : 204 (sublimation) [3]

4. Relative density (water = 1): 0.99 (25℃) [4]

5. Relative vapor density (air=1): 5.24[5]

6. Saturated vapor pressure (kPa): 0.024 (20℃) [6]

7. Heat of combustion (kJ/mol): -5898.0[7]

8. Critical pressure (MPa) : 2.99[8]

9. Octanol/water partition coefficient: 2.38[9]

10. Flash point (℃): 65.6 (CC) [10]

11. Ignition temperature (℃): 466[11]

12. Explosion upper limit (%): 3.5[12]

13. Explosion lower limit (%): 0.6[13]

14. Solubility: Slightly soluble in water, soluble in most organic solvents such as ethanol, ether, chloroform, carbon disulfide, oils, and solvent naphtha. [14]

15. Refractive index: 1.5462

16. Heat of evaporation (KJ/mol, b.p.): 59.54

17. Heat of fusion (KJ/mol): 6.85

18. Solubility (%, water): 0.01

Toxicological data

1. Acute toxicity[15]

LD50: 70mg/kg (rat dermal); 1310mg/kg (mouse dermal) Oral)

LC50: 500mg/m3 (rat inhalation)

2. Irritation No information available p>

3. Mutagenicity [16] Sister chromatid exchange: mice were given 80 mg/kg intraperitoneally.

Ecological data

1. Ecotoxicity[17] LC50: 110mg/L (96h) (fathead minnow, static); 35~50mg/L (48~96h) (Zebrafish)

2. Biodegradability [18] MITI-I test, initial concentration 100ppm, sludge concentration 30ppm, after 4 weeks Degraded 94%.

3. Non-biodegradability[19] In the air, when the hydroxyl radical concentration is 5.00×105 pcs/cm3, the degradation half-life is 1.6d (theoretical).

4. Bioconcentration[20] BCF: 38 (theoretical)

Molecular structure data

1. MountDistillate. The distillate is sent to the xylene recovery tower for fractionation to recover xylene and camphene for reuse. The molten camphor at the bottom of the tower continuously enters the sublimation pot and is heated to 210°C using an oil bath. The camphor continues to sublimate and is cooled into the sublimation chamber to become medicinal camphor. The non-condensable gas recovers the camphor through a water spray device and is discharged into the atmosphere.

Purpose

1. Camphor has a wide range of uses. It is used in medicine as a nerve stimulant and local stimulant, and can be used in cooling and heat-reducing drugs such as Ten Dishui and Rendan. Camphor is also used for antiseptic and insect-proof purposes. It can also be used to prepare food flavors such as mint, white lemon and nuts, as well as daily flavors such as toilet water and daily cosmetics. In addition, camphor is widely used in celluloid and photographic film, as a stabilizer in the manufacture of smokeless gunpowder, and as a raw material for the manufacture of sodium camphor sulfonate. Used as a plasticizer for nitrocellulose, cellulose ethers and cellulose esters. It is also used as a moth repellent, preservative, and in the manufacture of gunpowder, medicine, spices, fireworks, etc.

2. Used as incense and medicine. It is used medicinally as an antiseptic, local anesthetic, carminative, cardiotonic, etc. Used in cosmetics for nail polish. Used as a plasticizer for nitrocellulose. It is also used as a food flavoring, mainly used in the preparation of mint essence and essential oil imitations. It is also used in the production of rubber, electrical insulation materials, aircraft parts, etc. It is also used in the arms industry to produce explosion stabilizers for smokeless gunpowder, and in the pesticide industry to produce insecticides and preservatives.

3. Camphor can be used as a plasticizer for cellulose esters, ethers, and polyvinyl chloride.

4. Used in the manufacture of celluloid, chemical paints, photographic films, explosives, spices, insecticides, medicines, etc. [26]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/40939

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search