Toluene diisocyanate manufacturer Knowledge N-(2-Hydroxyethyl)iminodiacetic acid N-(2-Hydroxyethyl)iminodiacetic Acid

N-(2-Hydroxyethyl)iminodiacetic acid N-(2-Hydroxyethyl)iminodiacetic Acid

N-(2-hydroxyethyl)iminodiacetic acid structural formula

Structural formula

Business number 026M
Molecular formula C6H11NO5
Molecular weight 177.16
label

(2-Hydroxyethyl)iminodiacetic acid,

N-(carboxymethyl)-N-(2-hydroxyethyl)glycine,

N-Hydroxyethylimodiacetic acid,

2-Hydroxyethylaminodiacetic acid,

Ethanol diglycine,

HOCH2CH2N(CH2COOH)2

Numbering system

CAS number:93-62-9

MDL number:MFCD00004293

EINECS number:202-263-9

RTECS number:AI1925000

BRN number:1780628

PubChem number:24878686

Physical property data

1. Characteristics: white granular crystals or crystalline powder


2. Density (g/mL,25/4℃): Undetermined


3. Relative vapor density (g/mL,AIR=1): Undetermined


4. Melting point (ºC):168 ℃(180℃ decomposition)


5. Boiling point (ºC,Normal pressure): Undetermined


6. Boiling point (ºC,5.2kPa): Undetermined


7. Refractive index: undetermined


8. Flashpoint (ºC): Undetermined


9. Specific optical rotation (º): Undetermined


10. Autoignition point or ignition temperature (ºC): Undetermined


11. Vapor pressure (kPa,25ºCOil and water (octanol/Log value of partition coefficient (water): undetermined


17. Explosion limit (%,V/V): Undetermined


18. Lower explosion limit (%,V/V): Undetermined


19. Solubility: Easily soluble in hot water, slightly soluble in cold water.

Toxicological data

None

Ecological data

None

Molecular structure data

1. Molar refractive index:38.23


2. Molar volume (m3/ mol):121.5


3. Isotonic specific volume (90.2K): 356.8


4. Surface tension (dyne/cm): 74.2


5. Polarizability10-24cm3):15.15

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): -3.5

2. Number of hydrogen bond donors: 3

3. Number of hydrogen bond acceptors: 6

4. Number of rotatable chemical bonds: 6

5. Number of tautomers: none

6. Topological molecule polar surface area 98.1

7. Number of heavy atoms: 12

8. Surface charge: 0

9. Complexity: 153

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

None

Storage method

This product should be sealed and stored in a cool, dry place.

Synthesis method

Dissolve 60g chloroacetic acid in 200ml water, neutralize with 25g potassium carbonate, add 15g ethanolamine and 40g potassium carbonate, heat and reflux for 3 hours, cool and acidify to pH=2 with concentrated hydrochloric acid. After cooling, hydroxyethyl imine diacetic acid crystals precipitate. After recrystallization with water, 22g of finished product was obtained with a yield of 50%.

Purpose

As complexing agent.

t; FONT-FAMILY: 宋体; mso-ascii-font-family: Arial; mso-hansi-font-family: Arial; mso-bidi-font-family: Arial”>): 121.5


3. Isotonic specific volume (90.2K): 356.8


4. Surface tension (dyne/cm): 74.2


5. Polarizability10-24cm3):15.15

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): -3.5

2. Number of hydrogen bond donors: 3

3. Number of hydrogen bond acceptors: 6

4. Number of rotatable chemical bonds: 6

5. Number of tautomers: none

6. Topological molecule polar surface area 98.1

7. Number of heavy atoms: 12

8. Surface charge: 0

9. Complexity: 153

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

None

Storage method

This product should be sealed and stored in a cool, dry place.

Synthesis method

Dissolve 60g chloroacetic acid in 200ml water, neutralize with 25g potassium carbonate, add 15g ethanolamine and 40g potassium carbonate, heat and reflux for 3 hours, cool and acidify to pH=2 with concentrated hydrochloric acid. After cooling, hydroxyethyl imine diacetic acid crystals precipitate. After recrystallization with water, 22g of finished product was obtained with a yield of 50%.

Purpose

As complexing agent.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/40966

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search