Toluene diisocyanate manufacturer Knowledge Dibutyltin Maleate Dibutyltin Maleate

Dibutyltin Maleate Dibutyltin Maleate

Dibutyltin maleate structural formula

Structural formula

Business number 01MM
Molecular formula C12H20O4Sn
Molecular weight 346.99
label

dibutyltin maleate,

dibutyltin maleate,

dibutyltin maleate,

dibutyltin butenedioate,

Anhydrous dibutyltin malate,

2,2-Dibutyl-1,3,2-dioxastantin-4,7-dione,

dibutyltin maleate,

2,2-dibutyl-1,2,3-dioxastannepin-4,7-dione,

DBTM,

Heat stabilizers

Numbering system

CAS number:78-04-6

MDL number:MFCD00014120

EINECS number:201-077-5

RTECS number:JH4735000

BRN number:None

PubChem number:24867599

Physical property data

1. Appearance: White amorphous powder

2. Density (g/mL, 25/4℃): Uncertain

3. Relative vapor density (g/mL , air=1): Uncertain

4. Melting point (ºC): 108-113℃

5. Boiling point (ºC, normal pressure): Uncertain

6. Boiling point (ºC, 5.2kPa): Uncertain

7. Refractive index: Uncertain

8. Flash point (ºC): Uncertain

9. Specific optical rotation (º): Uncertain

10. Autoignition point or ignition temperature (ºC): Uncertain

11. Vapor pressure (kPa, 25ºC) : Uncertain

12. Saturated vapor pressure (kPa, 60ºC): Uncertain

13. Heat of combustion (KJ/mol): Uncertain

14 . Critical temperature (ºC): Uncertain

15. Critical pressure (KPa): Uncertain

16. Log value of oil-water (octanol/water) partition coefficient: Uncertain

17. Explosion upper limit (%, V/V): Uncertain

18. Explosion lower limit (%, V/V): Uncertain

19 . Solubility: Slightly soluble in benzene and toluene, insoluble in water.

Toxicological data

1. Acute toxicity

Rat inhalation LC50: 313 mg/m3/4H

Mouse LD50: 470 mg/kg;

2 , Reproductive toxicity:

Rat caliber LD50: 28 mg/kgSEX/DURATION Mouse half-lethal dose (intravenous): 56mg/kg

Ecological data

None yet

Molecular structure data

None yet

Compute chemical data

1. Number of hydrogen bond donors: 0

2. Number of hydrogen bond acceptors: 4

3. Number of rotatable chemical bonds: 6

4. Topological molecular polar surface area (TPSA): 52.6

5. Number of heavy atoms: 17

6. Surface charge: 0

7. Complexity : 282

8. The number of isotope atoms: 0

9. The number of determined atomic stereocenters: 0

10. The number of uncertain atomic stereocenters: 0

11. Determined number of stereocenters of chemical bonds: 0

12. Uncertain number of stereocenters of chemical bonds: 0

13. Number of covalent bond units :1

Properties and stability

It is irritating, toxic and tear-inducing.

Storage method

This product should be kept sealed. Packed in cardboard drums, the product is stored in a ventilated and dry place.

Synthesis method

(1) Synthesis of dibutyltin oxide. Put red phosphorus and butanol into the reaction kettle at room temperature, then add iodine in batches and stir while adding. As the reaction proceeds, the temperature gradually increases. When the temperature reaches 127°C When left or right, stop reacting. Add water to wash and let stand to separate. The water layer is separated, and the oil layer is fractionated to obtain refined iodobutane. Add iodobutane, solvent n-butanol, tin powder, and magnesium shavings to the reaction kettle, and react at 120 to 140°C under strong stirring. After reaching the end point, distillation is performed to recover n-butanol and unreacted iodobutane. The kettle liquid is crude butyltin iodide. Add 10% hydrochloric acid, control the temperature to 60-70°C, stir and wash for half an hour, let it stand and separate into layers, separate the waste acid liquid, and obtain refined di-n-butyltin diiodide. Add 20% caustic soda solution to di-n-butyltin diiodide, control the temperature to about 60°C while stirring, and proceed with the hydrolysis reaction. After the hydrolysis is completed, the mixture is allowed to stand for layering. After the water layer is separated, the mixture is washed with water to obtain refined di-n-butyltin oxide.

(2) Preparation of finished product Add dibutyltin oxide and maleic anhydride to the reaction kettle, control the temperature at 60 to 70°C with stirring, and perform a condensation reaction. The reaction product is dehydrated under reduced pressure and filtered to obtain the finished product.

Purpose

This product is a heat stabilizer for polyvinyl chloride, with excellent heat resistance and transparency, no sulfur pollution, and particularly good long-term heat resistance, which can prevent products from turning yellow during high-temperature processing.
This product is particularly suitable for hard transparent products. It has a higher melting point and will not reduce the softening point and impact of hard products. The general dosage is 0.5-2%. Used together with barium soap or cadmium soap, it has a synergistic effect and can further improve the stabilizing effect. Used together with dibutyltin laurate can further improve the transparency and heat resistance of the product. Used together with epoxy compounds can reduce Its tear-jerking properties. This product lacks lubricity and has poor processing performance; due to its volatility, it sometimes foams during processing; and, under the action of hydrogen chloride generated during heating, this product will translocate into fumarate ester, which is in phase with the resin. Decreased capacitance and prone to blooming. To overcome these shortcomings, many modified varieties have been developed.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/41507

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search