Toluene diisocyanate manufacturer Knowledge 1-Naphthaldehyde 1-Naphthaldehyde

1-Naphthaldehyde 1-Naphthaldehyde

1-naphthalene formaldehyde structural formula

Structural formula

Business number 01E9
Molecular formula C11H8O
Molecular weight 156.18
label

α-naphthaldehyde,

α-Naphthaldehyde

Numbering system

CAS number:66-77-3

MDL number:MFCD00004003

EINECS number:200-633-4

RTECS number:QJ0190000

BRN number:386082

PubChem number:24897459

Physical property data

1. Character: light yellow crystal

2. Density (g/mL, 25/4℃): 1.15

3. Relative vapor density (g/mL, air =1):>1

4. Melting point (ºC): 1-2

5. Boiling point (ºC, normal pressure): Uncertain

6 . Boiling point (ºC, 15mmHg): 160-161

7. Refractive index: 1.652

8. Flash point (ºF): >230

9. Specific rotation (º): Uncertain

10. Autoignition point or ignition temperature (ºC): Uncertain

11. Vapor pressure (kPa, 25ºC): Uncertain

12. Saturated vapor pressure (kPa, 60ºC): Uncertain

13. Heat of combustion (KJ/mol): Uncertain

14. Critical temperature ( ºC): Uncertain

15. Critical pressure (KPa): Uncertain

16. Log value of oil-water (octanol/water) partition coefficient: Uncertain

17. Explosion upper limit (%, V/V): Uncertain

18. Explosion lower limit (%, V/V): Uncertain

19. Solubility: Soluble in ethanol, ether, acetone, insoluble in water.

Toxicological data

Acute toxicity: rat oral LD50: 667 mg/kg; mouse unknown route LD50: 1100 mg/kg; guinea pig Administration onto the skin LD50: >20 mL/kg;

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 50.84

2. Molar volume (cm3/mol): 135.2

3. Isotonic specific volume (90.2K ): 356.1

4. Surface tension (dyne/cm): 48.1

5. Polarizability (10-24cm3):20.15

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: none

6. Topological molecule polar surface area 17.1

7. Number of heavy atoms: 12

8. Surface charge: 0

9. Complexity: 164

10. Number of isotope atoms: 0

11. Determine the atomic stereocenterQuantity: 0

12. Uncertain number of stereocenters of atoms: 0

13. Determined number of stereocenters of chemical bonds: 0

14. Uncertain chemical bonds Number of stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

None yet

Storage method

This product should be sealed and stored away from light.

Synthesis method

1. Preparation method:

In a reaction flask equipped with a stirrer, dropping funnel, ventilation tube (extending into the bottom of the reaction flask), and a reflux condenser, add 57g (0.3mol) of β-naphthoyl chloride (2) and 200mL of metallic sodium-dried dichloride. Toluene, 6gPd-BaSO4 catalyst. Replace the air in the reaction bottle with hydrogen. Pour hydrogen gas into the oil bath at 140-150°C with vigorous stirring at a ventilation rate of 1-2 bubbles/second. Hydrogen chloride gas escapes (can be absorbed by alkali). The reaction takes about 2 hours to complete (can be judged by checking whether hydrogen chloride escapes). Cool and filter off the catalyst. Activated carbon decolorizes. The xylene is distilled off. Then distill under reduced pressure, collect the fraction at 147~149℃/2.0kPa, and solidify after cooling to obtain 19g of β-naphthaldehyde (1), mp59~60℃. Yield 80%. [1]

2. Preparation method:

Into a reaction bottle equipped with a stirrer, dropping funnel, ventilation tube, and reflux condenser, add 400 mL of anhydrous ether and 76 g of anhydrous stannous chloride. Dry hydrogen chloride gas was introduced under cooling until saturated, and the reaction liquid was divided into two layers. A solution of 30.6g (0.2mol) of β-naphthylcarbonitrile (2) dissolved in 200mL of anhydrous ether was added dropwise under stirring, and then dry hydrogen chloride gas was introduced. Stir quickly and let sit overnight. The solid was filtered off and washed with diethyl ether. Add the solid matter to another reaction bottle, add water, and perform steam distillation. The distillate cools and a solid precipitates. After suction filtration and drying, 25g of β-naphthaldehyde (1) was obtained, with a yield of 80%. Distill under reduced pressure, collect the fraction at 156~158℃/2.0kPa, and solidify after cooling. mp57~58℃[2]

Purpose

Used in organic synthesis. Resins and medicines.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/42473

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search