n-Dodecane Dodecane

n-dodecane structural formula

Structural formula

Business number 035N
Molecular formula C12H26
Molecular weight 170.33
label

Lian Jiji,

dihexyl,

n-Dodecane,

Bihexyl,

Dihexyl,

general organic chemicals,

Standards and samples

Numbering system

CAS number:112-40-3

MDL number:MFCD00008969

EINECS number:203-967-9

RTECS number:JR2125000

BRN number:1697175

PubChem ID:None

Physical property data

1. Properties: colorless liquid

2. Density (g/mL, 25℃): 0.7487

3. Solubility parameter (J·cm– 3)0.5: 15.911

4. Melting point (ºC): -9.6

5. Boiling point (ºC, normal pressure): 216.3

6. Autoignition point or ignition temperature (ºC): 200

7. Solubility: easily soluble in ethanol, ether, acetone, chloroform and carbon tetrachloride, insoluble in water.

8.van der Waals area (cm2·mol-1): 1.774×1010

9. van der Waals volume (cm3·mol-1): 129.640

10. Critical temperature (K): 384.85

11. Critical pressure (MPa): 1.82

12. Critical density (g·cm-3): 0.226

13. Critical volume (cm3·mol-1): 754

14. Critical compression factor: 0.251

15 .Eccentricity factor: 0.573

16. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -8148.26

17. Gas phase standard claim Heat (enthalpy) (kJ·mol-1): -289.66

18. Gas phase standard entropy (J·mol-1·K-1): 624.2

19. Gas phase standard free energy of formation (kJ·mol-1): 50.83

20. Gas phase Standard hot melt (J·mol-1·K-1): 278

21. Liquid phase standard hot melt (J·mol-1·K-1): 376

22. Liquid phase standard entropy (J·mol-1·K-1): 490.38

23. Liquid phase standard free energy of formation (kJ·mol-1): 29.29

24 .Liquid phase standard combustion heat (enthalpy) (kJ·mol-1): -8086.96

25. Liquid phase standard claimed heat (enthalpy) (kJ·mol -1):-350.95

Toxicological data

1. Irritation: Rabbit transdermal: 50ul/24H Moderate irritation

2. Acute toxicity: Rabbit inhalation LC50: >142ppm/8H

Ecological data

No harm to water bodies.

Molecular structure data

1. Molar refractive index: 57.64

2. Molar volume (cm3/mol): 226.6

3. Isotonic specific volume (90.2K ): 509.5

4. Surface tension (dyne/cm): 25.5

5. Dielectric constant (F/m): 2.01

6. Electrode Chemical rate (10-24cm3): 22.85

Compute chemical data

1. Hydrophobic parameter calculation reference�(XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 0

4. Rotatable chemical bonds Number: 9

5. Number of tautomers: None

6. Topological molecule polar surface area 0

7. Number of heavy atoms: 12

8. Surface charge: 0

9. Complexity: 56.4

10. Number of isotope atoms: 0

11. Determine the atoms Number of stereocenters: 0

12. Uncertain number of stereocenters of atoms: 0

13. Determined number of stereocenters of chemical bonds: 0

14. Uncertain number of stereocenters of chemical bonds: 0

15. Number of covalent bond units: 1

Properties and stability

Avoid contact with strong oxides.

Storage method

Stored sealed in a cool, dry place. Make sure the workspace has good ventilation. Keep away from sources of fire. Store away from oxidizing agents.

Synthesis method

1. Preparation method:

In a dry reaction bottle equipped with a stirrer, thermometer, and reflux condenser (installed with a calcium chloride drying tube), add 50 mL of hexamethylphosphoramide (HMPA), n-12 p-toluenesulfonic acid Alkyl ester (2) 6.8g (0.0201mol), sodium cyanoborohydride 5.02g (0.08mol). React at 80°C for 2 hours with stirring. After cooling, add 50 mL of water and extract three times with n-hexane. Combine the organic extracts, wash twice with water, dry over anhydrous magnesium sulfate, and distill under reduced pressure. Collect the 79-81°C/1.86KPa fraction to obtain 2.5-2.65g of n-dodecane (1), with a yield of 79%-81 %. Note: ① Using sodium cyanoborohydride to reduce alkyl halides and sulfonate esters in hexamethylphosphoramide is a convenient method for preparing alkanes with high selectivity. Other functional groups in the molecule such as carboxyl, carboxylate, cyanide Groups, nitro groups, amide groups, carbonyl groups, oxirane groups, etc. are not affected. [1]

2. Preparation method:

Use 23g (1.0mol) sodium metal and 82.5g (62mL, 0.5mol) 1-bromohexane (2) or 99g (65.5mL, 0.5mol) 1-Bromopentane was prepared according to the above operation method for n-octane, and the fraction at 94°C/174KPa was collected to obtain about 37g n-decane (1), with a yield of 87%. [2]

Purpose

Used as organic synthesis intermediates; solvents and standard materials for chromatographic analysis.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/44470

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search