Toluene diisocyanate manufacturer Knowledge Preparation method of 2,4,6-tri-tert-butyronitrosobenzene_Kain Industrial Additive

Preparation method of 2,4,6-tri-tert-butyronitrosobenzene_Kain Industrial Additive

Background and overview[1]

2,4,6-Tri-tert-butylnitrosobenzene can be used as a pharmaceutical synthesis intermediate. If 2,4,6-tri-tert-butyl-nitrosobenzene is inhaled, please move the patient to fresh air; if the skin comes into contact, take off contaminated clothing and wash the skin thoroughly with soap and water. If you feel discomfort , seek medical attention; if eye contact occurs, separate eyelids, rinse with running water or saline, and seek medical attention immediately; if ingested, rinse mouth immediately, do not induce vomiting, and seek medical attention immediately.

Preparation[1]

The preparation of 2,4,6-tri-tert-butyronitrosobenzene is as follows:

Dissolve TTBA (2,4,6-tri-tert-butylaniline, 127mM) in 3 ml MeOH, add [Mn (L) Cl2] complex (12.7mM) to the suspension in MeOH, and then Add H2O2 (127mM of 2,4,6-tri-tert-butylaniline). The above reaction was repeated using TBHP instead of H2O2 as the oxidant (2,4,6-tri-tert-butylaniline was 127mM). The reaction mixture was stirred in a water bath at a temperature of 45°C for 48 hours and monitored continuously using TLC. 2 spots were observed at different Rf values ​​and the reaction mixture was run on a short column after 48 hours and eluted with 20% ethyl acetate/hexane. Evaporation of the eluate to a small volume and holding overnight gave the desired product 2,4,6-tri-tert-butyronitrosobenzene. The above oxidation reaction can also use [Mn(L)(CH3COO)2] as a catalyst instead of [Mn(L)Cl2], but the product distribution obtained by using the [Mn(L)(CH3COO)2] complex as a catalyst is very complex, and the column Chromatography did not produce the separation of a single product. This may also explain why there are many products using [Mn(L)(CH3COO)2] as the oxidation catalyst to obtain hindered phenols and anilines.

1HNMR(d6-DMSO)(ppm):1.22(s,9H),1.38(s,18H),7.06(s,2H).13CNMR(d6-DMSO):168.0(C-1),142.1( C-4), 133.0 (C-2, C-6), 121.3 (C-3, C-5), 34.8 (C-7), 30.5 (C-8), 34.3 (C9), 32.0 (C- 10).ESIMS+(m/e):274,261,246,230.IR(cm1):1620,1363,%yield:75(Yieldsrefertoisolatedyield).

Main reference materials

[1] Organo-peroxyl compounds via catalytic oxidation of a hindered phenol and

aniline utilizing new manganese(II) bis benzimidazole diamide based complexes

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/4708

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search