DL-menthol

DL-menthol structural formula

Structural formula

Business number 021C
Molecular formula C10H20O
Molecular weight 156.27
label

2-isopropyl-5-methylcyclohexanol,

Menthol (racemic),

menthol,

2-Isopropyl-5-methyl cyclohexanol,

Menthol (DL),

p-Menthan-3-ol,

Menthyl alcohol,

artificial flavors,

alcohol solvent

Numbering system

CAS number:89-78-1

MDL number:MFCD00001484

EINECS number:201-939-0

RTECS number:OT0350000

BRN number:1902288

PubChem number:24901226

Physical property data

1. Properties: Colorless and transparent rod-shaped crystals with a cool mint aroma.

2. Density (g/mL, 20/4℃): 0.890

3. Relative density (20℃, 4℃): 0.90415

4. Melting point (ºC): 27~28

5. Boiling point (ºC, normal pressure): 212~215

6. Boiling point (ºC, 5.2kPa): Undetermined

7. Refractive index (n25D): 1.4615

8. Flash point (ºC): 95

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturated vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16 . The logarithmic value of the oil-water (octanol/water) partition coefficient: Undetermined

17. The upper explosion limit (%, V/V): Undetermined

18. The lower explosion limit (% ,V/V): Undetermined

19. Solubility: Easily soluble in alcohol, chloroform, ether, glacial acetic acid, liquid paraffin, animal oil and essential oil, slightly soluble in water.

Toxicological data

None

Ecological data

None

Molecular structure data

1. Molar refractive index: 47.83

2. Molar refractive index: 47.83

2. Molar refractive index� Volume (cm3/mol): 175.5

3. Isotonic volume (90.2K): 409.8

4. Surface tension (dyne/cm) :29.7

5. Polarizability (10-24cm3): 18.96

Compute chemical data

1. Hydrophobic parameter calculation reference value (XlogP): 3

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 1

5. Number of tautomers:

6. Topological molecular polar surface area (TPSA): 20.2

7. Number of heavy atoms: 11

8. Surface charge: 0

9. Complexity: 120

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 3

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters Number: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. The left-handed one is colorless needle crystal. Soluble in ethanol and miscible with oils. It has a cool, fresh and pleasant mint characteristic aroma with a sweet spiciness. It gives people a cold feeling and the fragrance is translucent, but not long-lasting. The taste is also fresh, sweet and cool.

2. Exist in flue-cured tobacco leaves, oriental tobacco leaves, and mainstream smoke.

3. Naturally found in peppermint oil and Japanese peppermint oil, and in small amounts in essential oils such as geranium oil.

4. There are 12 isomers.

5. There is a trace amount of liquid oil and a very small amount of non-volatile matter on the surface of ordinary crystals. Synthetic menthol is a mixture of various isomers.

6. It has certain toxicity, irritation and allergic reactions.

Storage method

This product should be sealed and stored in a cool place.

Synthesis method

1. Menthol can be purified from natural mint crude oil or made synthetically. The essential oil obtained by steam distillation of the above-ground parts (stems, branches, leaves and inflorescences) of the Lamiaceae plant mint is called mint crude oil, with an oil yield of 0.5-0.6. There are many methods for synthesizing menthol.

2. Tobacco: FC, 18; OR, 41. Synthesis: L-menthol is obtained from peppermint oil through cooling, crystallization and separation. (+)-menthol is prepared by a semi-synthetic method, using citronellal obtained by distilling citronella oil or piperone obtained from eucalyptus oil as raw materials.

Purpose

1. Menthol and racemic menthol are both used as flavoring agents in toothpaste, perfume, beverages and candies. It is used as a stimulant in medicine, acting on the skin or mucous membranes, and has a cooling and antipruritic effect; taken orally, it can be used as a carminative for headaches and inflammation of the nose, pharynx, and larynx. Its esters are used in spices and medicines. In the world, my country and Brazil are the main natural mint production gardens, with the annual output of peppermint oil reaching 2000-3000t.

2.Widely used in daily flavors, edible flavors, and tobacco flavors. Generally, it is 1100mg/kg in chewing gum; 400mg/kg in candy; 130mg/kg in baked goods; 68mg/kg in ice cream; soft drinks Medium 35mg/kg.

3. It has bactericidal and antiseptic effects.

4. Used as special additives for therapeutic cosmetics. Used for toilet water, etc. It can also be used as a flavoring agent for toothpaste, perfume, beverages and candies. Used for making candies, beverages, spices and medicinal purposes.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/47120

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search