2-amino-1-butanol

2-amino-1-butanol structural formula

Structural formula

Business number 02AP
Molecular formula C4H11NO
Molecular weight 89.14
label

(±)-2-amino-1-butanol,

Butanolamine,

(±)-2-Amino-1-butanol,

Butanolamine

Numbering system

CAS number:96-20-8

MDL number:MFCD00008095

EINECS number:202-488-2

RTECS number:EK9625000

BRN number:1098274

PubChem number:24846021

Physical property data

1. Properties: colorless liquid.

2. Density (g/mL, 25/4℃): 0.944

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): -2

5. Boiling point (ºC, normal pressure): 178

6. Boiling point (ºC, 5.2kPa): Undetermined

7. Refractive index (n20): 1.453

8. Flash point (ºC): 107

9. Specific rotation Degree (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturated vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC) : Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Can be compared with Mixable with water, soluble in alcohol and ether. It smells like ammonia.

Toxicological data

1. Acute toxicity: Rat oral LD50: 2300mg/kg; mouse intraperitoneal LDLo: 250mg/kg; mouse intravenous LD50: 316mg/kg;

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 25.60

2. Molar volume (cm3/mol): 96.1

3. Isotonic specific volume (90.2K ): 234.4

4. Surface tension (dyne/cm): 35.3

5. Polarizability (10-24cm3): 10.15

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): -0.4

2. Number of hydrogen bond donors: 2

3. Number of hydrogen bond acceptors: 2

p>

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 46.2

7. Number of heavy atoms: 6

8. Surface charge: 0

9. Complexity: 30.7

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain atomic stereocenter Number of stereocenters: 1

13. Determined number of stereocenters of chemical bonds: 0

14. Uncertain number of stereocenters of chemical bonds: 0

15. Total Number of price key units: 1

Properties and stability

1. Avoid contact with strong oxidants and acids.

2. It is harmful and corrosive when taken orally and can cause burns.

Storage method

1. Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Protect from direct sunlight. Keep container tightly sealed. They should be stored separately from oxidants and acids, and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

1. Obtained from the chlorination addition reaction of butene-1 with acetonitrile and chlorine, followed by hydrolysis, alcoholization and alkalization. With the exception of the alkalizing operation, the process is carried out continuously in the pipelined unit in the following sequence. The purity of Butene-1 is 50-80%. The molar ratio of the chlorination reaction is butene-1: chlorine: acetonitrile = 1: 0.85: 7-8. The reaction temperature is 40-50°C, and the feed flow rate is 2.5-3.0kg/h. After the chlorination reaction is completed, the acetonitrile and dichlorobutane in the reaction are distilled and recovered using an acetonitrile recovery tower. Then carry out alcoholysis reaction, add the distilled reaction liquid to hydrochloric acid and ethanol equivalent to the weight of butene-1, feed at normal pressure, the temperature at the bottom of the tower is 104°C, the temperature at the top of the tower is 72-75°C, and the reaction is carried out while steaming The resulting mixture of ethyl acetate, water and ethanol was produced. The alcoholysis reaction liquid is alkalized with sodium hydroxide and distilled to obtain crude 2-aminobutanol. Finally, products with a content of more than 95% are obtained by fractionation under reduced pressure.

Purpose

1. Used to prepare emulsifiers, surfactants, vulcanization accelerators, organic synthesis, and acid gas absorbers. After separation, (+) 2-aminobutanol is obtained, which is used to produce the anti-tuberculosis drug ethambutol.

2. Organic synthetic acid gas absorbent.

extended-reading:https://www.bdmaee.net/wp-content/uploads/2022/08/Dioctyltin-dichloride-CAS-3542-36-7-Dioctyl-tin-dichloride.pdf
extended-reading:https://www.bdmaee.net/catalyst-a400-a400-polyurethane-catalyst-a400/
extended-reading:https://www.bdmaee.net/wp-content/uploads/2022/08/Catalyst-8154-NT-CAT8154-polyurethane-catalyst-8154.pdf
extended-reading:https://www.bdmaee.net/wp-content/uploads/2020/07/90-1.jpg
extended-reading:https://www.newtopchem.com/archives/947
extended-reading:https://www.cyclohexylamine.net/cs90-catalyst-dabco-cs90-polyurethane-catalyst-cs90/
extended-reading:https://www.newtopchem.com/archives/754
extended-reading:https://www.cyclohexylamine.net/category/product/page/18/
extended-reading:https://www.bdmaee.net/nt-cat-dmdee-catalyst-cas110-18-9-newtopchem/
extended-reading:https://www.bdmaee.net/niax-stannous-octoate-soft-foam-catalyst-momentive/

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/50529

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search