o-Methoxyacetanilide

O-methoxyacetanilide structural formula

Structural formula

Business number 0262
Molecular formula C9H11NO2
Molecular weight 165.19
label

2-acetamidoanisole,

Acetaminophen,

o-Methoxyacetanilide,

o-Acetamidoanisole,

N-Acetylanisidine,

N-Acetyl-o-anisidine,

N-Acetyl-ortho-anisidine,

o-Methoxyacetanilide,

o-Acetanisidine

Numbering system

CAS number:93-26-5

MDL number:MFCD00026117

EINECS number:202-233-5

RTECS number:AE8280000

BRN number:None

PubChem number:24872018

Physical property data

1. Properties: White needle-like crystals.

2. Density (g/mL, 25/4℃): Undetermined

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 87-88

5. Boiling point (ºC, normal pressure): 303-305

6. Boiling point (ºC, 5.2kPa) : Undetermined

7. Refractive index: Undetermined

8. Flash point (ºC): Undetermined

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12 . Saturated vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

p>

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Easily soluble in hot water and ethanol, soluble in Ether and other organic solvents. The solubility in water, acetic acid, ether and ethanol is above 10%. Slightly soluble in cold water.

Toxicological data

The median lethal dose (mice, oral) 940 mg/kg.

Ecological data

None

Molecular structure data

1. Molar refractive index: 47.20

2. Molar volume (cm3/mol): 146.5

3. Isotonic specific volume (90.2K ): 367.6

4. Surface tension (dyne/cm): 39.6

5. Polarizability (10-24cm3): 18.71

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: 3

6. Topological molecule polar surface area 38.3

7. Number of heavy atoms: 12

8. Surface charge: 0

9. Complexity: 159

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

None

Storage method

Store in a sealed, cool, dry and dark place.

Synthesis method

Obtained from the reaction of anthranilic ether and acetic anhydride. Put the measured amount of o-anisole into the reaction kettle, and add glacial acetic acid under stirring. Add acetic anhydride dropwise at 10 to 12°C, finish the addition in about 2 hours, and let it stand for 2 hours to obtain the intermediate o-acetamidoanisole for industrial use. The ingredient ratio is anthranilate: glacial acetic acid: acetic anhydride = 1:0.9:1 (weight ratio). You can also mix anthranilate and acetic anhydride, reflux in a sand bath for 2 hours, let cool, obtain needle-like crystals, filter, wash away the acidity with water, and then recrystallize with water to obtain the finished product.

Purpose

1. Organic synthesis. Used as raw material for organic synthesis, used in the manufacture of pesticides, medicines, etc. Preparation of aniline yellow and other dyes.

extended-reading:https://www.bdmaee.net/anhydrous-tin-tetrachloride/
extended-reading:https://www.bdmaee.net/fascat4100-catalyst-arkema-pmc/
extended-reading:https://www.bdmaee.net/delayed-amine-a-400/
extended-reading:https://www.cyclohexylamine.net/polycat-sa102-niax-a-577/
extended-reading:https://www.bdmaee.net/pc-cat-np109-low-odor-tertiary-amine-hard-foam-catalyst-nitro/
extended-reading:https://www.cyclohexylamine.net/dabco-bl-13-niax-a-133-jeffcat-zf-24/
extended-reading:https://www.bdmaee.net/wp-content/uploads/2022/08/Pentamethyldiethylenetriamine-CAS-3030-47-5-PC5.pdf
extended-reading:https://www.bdmaee.net/cas-753-73-1/
extended-reading:https://www.newtopchem.com/archives/44472
extended-reading:https://www.bdmaee.net/wp-content/uploads/2022/08/Dibutyltin-dilaurate-CAS77-58-7-dibutyl-tin-dilaurate.pdf

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/51095

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search