Toluene diisocyanate manufacturer Knowledge Preparation of 2-bromo-5-hydroxymethylphenol_Kain Industrial Additive

Preparation of 2-bromo-5-hydroxymethylphenol_Kain Industrial Additive

Background and Overview

2-Bromo-5-hydroxymethylphenol is an organic synthesis intermediate and pharmaceutical intermediate that can be used in laboratory research and development processes and chemical and pharmaceutical synthesis processes.

Preparation[1]

Methyl 4-bromo-3-hydroxybenzoate (70): To a suspension of methyl 4-amino-3-hydroxybenzoate 69 (21.7 g, 127 mmol) in water (115 mL) at 0°C Add a solution of sodium nitrite (9.1 g, 127 mmol) in water (50 mL). The resulting mixture was stirred at 0°C for 1 hour. Meanwhile, dissolve copper sulfate pentahydrate (42.4g, 169mmol) in water (135mL) under heating and slowly add sodium bromide (26.4g, 257mmol) under stirring.

The resulting dark green solution was stirred for 5 minutes and then treated with a solution of sodium sulfite (11.3 g, 90 mmol) in water (40 mL). The resulting lime green slurry was stirred for 5 minutes and then cooled by adding ice. Decant off the ice water, being careful to avoid drying it out. The residue was washed with water (3x) and the resulting white solid was dissolved in 115 mL of concentrated HBr (115 mL). The acidic copper bromide solution was added to the diazonium salt suspension at 0°C. The resulting mixture was gradually heated to 100°C and then stirred at this temperature for 1 hour. Significant bubbling was observed. After this time, the reaction mixture was cooled and the pH was brought to 4-5 by adding sodium carbonate. EtOAc was added and the mixture was filtered. The filtrate was extracted with EtOAc (3x). The organic layer was dried with Na2SO4 and filtered to obtain 70.

2-Bromo-5-hydroxymethylphenol (71): Suspended in 4-bromo-3-hydroxybenzoic acid methyl ester 70 (6.97g, 30.2mmol) in dichloromethane (360mL) at 0°C Add DIBALH (100 mL, 1M toluene solution, 100 mmol) into the solution in batches. Significant gas evolution was observed. The resulting mixture was warmed to room temperature and stirred for 2.75 hours. After this time, the reaction mixture was quenched by adding saturated aqueous sodium potassium tartrate solution (600 mL) and saturated aqueous ammonium chloride solution (100 mL). The resulting biphasic mixture was stirred vigorously for 2 hours and then extracted with dichloromethane (3x). The organic layer was dried with Na2SO4 and filtered to obtain 71.

Main reference materials

[1] U.S. Pat. Appl. Publ., 20040097485, 20 May 2004

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.allhdi.com/archives/5766

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Back to top
Home
E-mail
Products
Search