Application
1. Screen printing binder
2. Membrane composite
3. Binder, adhesion promoter
Features
1. Suitable ink binder
2. Excellent adhesion
3. FDA certified CFR 175; 175.300 and 176.170
Performance
parameter |
unit |
numbervalue |
Appearance |
— |
grains |
Molecular Weight |
— |
21,000 |
Viscosity |
dL /g |
0.62 |
Glass transition temperature |
℃ |
65 |
softening point |
℃ |
140 |
acid value |
KOH mg/g |
less than 3 |
OHValue |
KOH mg/g |
2 ~5 |
tensile strength |
kg /cm² |
720 |
Dissolution method
1. Put all solvents in the reactor.
2. While stirring, put the ES-100 solid into the reactor.
3. After adding all components, raise the temperature of the reactor to 90~100 degrees . If MEK and acetone are used, the reactor temperature is raised to 50-60 degrees. Stir for two hours. Reactor maximum pressure: 2kg/cm²
4. Turn off the heating system. Stirring was continued for one and a half hours, allowing the reactor to cool naturally.
5. Stop stirring, filter the solution, and put it into a 200kg bucket.
Solvents used
MEK, Toluene, Xylene, SOLVESSO, Cyclohexanone, Cellulose Acetate, Isophor Ketones, DBE
Packaging
25kg/bag;14MT/FCL
Solvents used
MEK, Toluene, Xylene, SOLVESSO, Cyclohexanone, Cellulose Acetate, Isophor Ketones, DBE
Packaging
25kg/bag;14MT/FCL