Chemical Name : 2-ethylhexyl 3-mercaptopropionate
English name : 2-ETHYLHEXYL-3-MERCAPTOPROPIONATE 2-EHMP
Product Indicators
nature |
Typical values |
Molecular Weight |
218.4 |
Appearance |
Water white clear liquid |
Sulfur content |
14.6% |
Mercapto (% content) |
15.1% |
Purity (M/M ) |
≥99 |
acidity (mg KOH/g) |
Max0.05 Pa |
Chroma (APHA) |
Max20 cP |
Specific gravity (15.5℃) |
0.962g/cm3 |
Refractive Index n20d |
1.4615±0.0010 |
Boiling point (℃) |
124℃ |
Melting point(℃) |
14.1℃ |
Flash point (20℃ ) |
135.5℃ |
Solubility (20℃ ) |
gram/liter |
Recommended use (same as IOMP)
Mainly used in the polymerization of acrylic resin, styrene, ABS, processing aid ACR, neoprene, styrene-acrylic latex, styrene-butadiene latex, etc. Its function is similar to that of n-dodecyl mercaptan, but the smell is much smaller than that of mercaptan.
(1) In the production of acrylic resin polymerization (such as hammer paint), adding this product can effectively adjust the molecular weight distribution of the resin, make the resin have good leveling property, uniform viscosity, and make the paint film appear bright.
(2) In the production of plastic processing aid ACR (methacrylate polymerization), adding this product can effectively control the intrinsic viscosity of the product. The methacrylates are polymerized according to the technical requirements.
(3) Sulfur-tin stabilizer for PVC with sulfur content
(4) Polymer molecular weight regulator
Packaging :200KG/D
Place of Origin :Germany
branding :Bruno bock
Other : IOMP is restricted by the European REACH regulations due to the output of the supplier Bruno bock, and the output cannot exceed 100 tons (the output they apply for exceeds this output, and they need to pay a large amount of 1-5 million US dollars), so the quantity of goods supplied to us is quite limited, so we recommend another product, 2-EHMP, which has the same performance and effect except that the viscosity is slightly higher than that of IOMP.
(3) Sulfur-tin stabilizer for PVC with sulfur content
(4) Polymer molecular weight regulator
Packaging :200KG/D
Place of Origin :Germany
branding :Bruno bock
Other : IOMP is restricted by the European REACH regulations due to the output of the supplier Bruno bock, and the output cannot exceed 100 tons (the output they apply for exceeds this output, and they need to pay a large amount of 1-5 million US dollars), so the quantity of goods supplied to us is quite limited, so we recommend another product, 2-EHMP, which has the same performance and effect except that the viscosity is slightly higher than that of IOMP.